Table Top Steam Sterilizer Fully Automatic Microcomputer Type
In order to eliminate microbes and any kind of bacteria, you need to properly sterilize every tool you use inside your laboratory. In order to do that, you must have a tabletop steam sterilizer. This device is one of the most important one, because the sterilization process is fundamental when you are performing important tests and researches.
The way these devices work is when steam enters the sterilizer chamber and contacts the outer layer of the wrapped fabric packs, condensing on the surface and transferring heat to the fabric. After this happens, the steam condenses on the next layer inward and the process continues until the steam has heated all items within the packs. After the sterilization cycle is complete, the steam is exhausted and the sterile items are dried using radiant heat from the chamber and the evaporative effect of the vacuum methods.
When it comes to autoclaving, there are a number of factors to keep in mind in order to achieve proper sterilization, especially against bacteria and viruses. In the case of steam sterilizer, it is important that the heat be in direct contact with the material you want to sterilize. In addition, it is important that you create vacuum in order to displace all the air that is present in the autoclave, by replacing it with steam. Another important key factor is to implement a well designed control scheme for steam evacuation and cooling so that the load does not perish.
You should know some technical details about this tabletop-steam sterilizer model. First, the sterilizing course works automatically because it is controlled by computer, making it a lot easier to operate it. The maximum temperature can reach up to 134 degrees Celsius, which is suitable for rapidly sterilizing in 4 to 6 minutes. About the safety features, you should know that this model has a safe protection of water lacking. In addition, it has a digital display of the working status with a touch type key. One of the most important aspects is that after the device finishes the sterilization it automatically cuts the power and starts an alarm. About the structure, you should know that this sterilizer is made from stainless steel. In addition, this tabletop steam sterilizer has a steam-water inner circulation system: with no steam discharge and the environment for sterilizing will be clean and dry. Moreover, this model exhausts the cool air automatically, it has a door safety-lock system and it comes with a drying function. Finally, this tabletop steam sterilizer comes with four stainless steel sterilizing plates.
Features of Table Top Steam Sterilizer Fully Automatic Microcomputer Type
- For 4~6 minutes rapidly sterilizing.
- Digital display of working status,touch type key.
- With 3 fixed cycles of water adding,temperature rising,sterilizing,drying steam discharging controlled automatically.
- The whole process of water adding,temperature rising,sterilizing,drying steam discharging controlled automatically.
- Steam-water inner circulation system:no steam discharge,and the environment for sterilizing will be clean and dry.
- Exhaust the cool air automatically.
- Safe protection of water lacking.
- Door safety lock system.
- With four stainless steel sterilizing plates.
- The chamber of the sterilizer is made of stainless steel.
- Automatically shut off with beep reminding after sterilization.
- With drying function.